Basketball basket installation teaching 45m 45cm

How to install the basketball frame
The basket frame shall be made according to the following requirements: (1) solid iron bar with an inner diameter of 0.45 m (45 cm) and painted orange; (2) The minimum diameter of the circle bar is 0.017 m (17 mm) and the maximum is 0.020 m (20 mm). The lower edge of the circle is provided with a small ring or something similarHow does the basketball frame fit on the wall? - ask
Only four holes need to be drilled in the wallWho taught me how to install the basketball board to the wall (more details, better pictures) I am satisfied with the heavy
First install the frame on the board, and then install the board on the wall. If there is no example between the board and the wall, there is no real feeling when the ball hits the board, so there is a distance between them. If there is something like a shelf in the things you buy, it should be placed between the board and the wall. There should be at least three holes in the wall (in the case of Kanban)
How to install a basketball frame on the wall without nails
The basketball frame nailed to the wall with nails is also unstable. I think it will be stronger with electric welding or fixed with expansion screws. This is more reliable
How to correctly install mobile dismantling basketball stand

How to install the basketball frame on the wall
How to install the basketball frame on the wall? Ask about the actual height of your wall. Use a hand drill to replace it with a drill bit suitable for the size of the screw hole on your basket to drill on the wall. The size of the expansion bolt sold in the hardware store should be appropriate. Remove the non expansion screw cap and install it into the basketHow to install the hoop and backboard of the basketball frame
Basketball rack installation instructions: the basketball court is 28 meters long and 15 meters wide. It is a solid rectangular plane without obstacles. The buffer zone shall be considered during site construction. In principle, FIBA stipulates that 2m shall be reserved for the end line area and 1m for the sideline. Mobile basketball rack installation: connect the column and base screwWhat are the key points of basketball frame installation
1. Excavate the pit according to the size of the base. Professional basketball frame installers will determine the size of the pit and fill the pit with concrete after the basketball frame is installed. 2. the distance between the edge of the basketball stand and the end line of the basketball court is 60cm. 3. the backboard, basketball frame and hoop shall be fixed with screwsHow to install the basketball stand
Step introduction: place the base of the basketball rack at the installation position. Install the column and screws. Install the probe arm, align the screw hole of the probe arm with the column, screw and install the rear pull rod, install the blue plate, pull brace