Video teaching of mobile basketball stand 8m; the hoop is 3 above the ground

How to move a movable basketball stand
The box body of the mobile box basketball stand is made of 2-3mm steel plate through equipment forging and splicing; Column adopts 130 130mm high-quality square tube, 1.8m arm extension; The rim is 3.05M above the ground, and the lower edge of the backboard is 2.9m above the ground. Rear tie rod adopts 4 4cm thick high-quality round pipe is made into ladder type; Four fixed tie rodsHow to install the mobile tempered glass basketball stand
Taizhou yinghuang sports equipment factory has the whole process of video installation of all basketball stands, or you can go to Youku to collect the video, and a person can hang on the basketball stand to dance and install the video
What are the mobile basketball stands, and what are the specific parameters and installation methods
Well, 80% of the mobile basketball frames used by schools and companies are concave box type, and the back pull rod is solid. Why? Because this can prevent students from climbing the basketball rack. The company's words are casualHow to fix the mobile basketball stand
The mobile basketball stand is fixed by placing counterweights in the bottom box
How to correctly install mobile dismantling basketball stand
Before installing the mobile basketball stand, you should first understand the specific configuration and parameters of the basketball stand. Its box body is basically the center of gravity of the whole basketball stand, including counterweights (the counterweights of many manufacturers are sand, bricks and stones. In fact, these do not meet the national standards. The counterweights will be reduced after exposure to the sun and water, and the safety can not be guaranteed, so it is easy
How to install the basketball stand
Step introduction: place the base of the basketball rack at the installation position. Install the column and screws. Install the probe arm, align the screw hole of the probe arm with the column, screw and install the rear pull rod, install the blue plate, pull brace
How to move the basketball stand in the gymnasium
You can use the hand push lifting forklift for logistics to insert into the bottom box of the basketball stand. Note that multiple people are required to cooperate when moving. Use a large rope to pull the main column of the basketball stand to keep balance. If it is a fixed type, it can only be removed after removing the backboard
How to install the ball rack
The basketball court is 28 meters long and 15 meters wide. It is a solid rectangular plane without obstacles. The buffer zone shall be considered during site construction. In principle, FIBA stipulates that 2m shall be reserved for the end line area and 1m for the sideline. The mobile basketball stand is installed with screws connecting the column and the base, and the four screws are not tightened temporarily; II